England
Hardwood windows in Gloucestershire
Bespoke timber windows and doors, surveyed, made and installed across Gloucestershire — Gloucester, Cheltenham, Cirencester, Stroud, Tewkesbury and everywhere between.
Choosing hardwood windows for a property in Gloucestershire is mostly a question of substrate and detail. Get the timber and the sections right and the finish looks after itself for decades.
We treat timber joinery in Gloucestershire as joinery rather than a product line. That means real sections, real ironmongery and a finish specified for the exposure the building actually gets.
What we bring to a Gloucestershire project
- Stainless or solid brass ironmongery, because plated steel fails first and takes the finish with it.
- Weathered cills with a proper drip groove, so water leaves the timber instead of tracking back under it.
- Glazing beaded internally, so the sealed units can be replaced without disturbing the external finish.
- Trickle ventilation designed into the head where Building Regulations require it, not drilled in afterwards.
- Kiln-dried to 12% moisture content before machining, so the sections stay true once they are installed.
Guide prices in Gloucestershire
Prices below are supplied-and-fitted including VAT, for a typical domestic unit in Idigbo with double glazing and a factory-painted finish. Oak, Accoya, triple glazing and larger openings move the figure up; ordering several units at once brings it down.
| Product | Guide range, fitted |
|---|---|
| Hardwood Sash Windows | £1,900 – £2,600 |
| Timber Casement Windows | £1,400 – £1,900 |
| Timber Flush Casement Windows | £1,500 – £2,050 |
| Oak Windows | £2,300 – £3,200 |
| Accoya Windows | £2,100 – £2,900 |
| Sapele Windows | £1,700 – £2,300 |
| Idigbo Windows | £1,500 – £2,050 |
| Hardwood Bay Windows | £3,800 – £5,500 |
| Georgian Bar Windows | £1,800 – £2,500 |
| Conservation Area Windows | £2,000 – £2,800 |
If you are working to a planning or listed building condition in Gloucestershire, send us the wording — we will specify to it and provide the drawings you need.
Free survey in Gloucestershire
Measured, priced and drawn before anything is made.
Every product, available across Gloucestershire
Windows
Traditional box and spring sliding sash windows in solid hardwood.
Learn more →Guide from £1,900Timber Casement WindowsSide and top-hung casements built to traditional proportions.
Learn more →Guide from £1,400Timber Flush Casement WindowsSashes that sit flush within the frame for a clean, traditional face.
Learn more →Guide from £1,500Hardwood Bay WindowsSplayed, square and canted bays built as one structural unit.
Learn more →Guide from £3,800Hardwood Tilt & Turn WindowsDual-action hardwood windows for ventilation and cleaning.
Learn more →Guide from £1,900Timber
European oak windows with exceptional grain and durability.
Learn more →Guide from £2,300Accoya WindowsModified timber with a 50-year above-ground warranty.
Learn more →Guide from £2,100Sapele WindowsA dense, stable hardwood with a warm reddish tone.
Learn more →Guide from £1,700Idigbo WindowsLight-toned hardwood, excellent value for painted finishes.
Learn more →Guide from £1,500Heritage
True astragal and putty-line glazing bars for period accuracy.
Learn more →Guide from £1,800Conservation Area WindowsWindows detailed to satisfy conservation area planning.
Learn more →Guide from £2,000Listed Building WindowsLike-for-like joinery for Grade I, II* and II properties.
Learn more →Guide from £2,300Hardwood Cottage WindowsSmall-pane hardwood windows for cottages and barns.
Learn more →Guide from £1,500Glazing
Warm-edge sealed units in solid hardwood frames.
Learn more →Guide from £1,600Triple Glazed Timber WindowsDeep-section hardwood frames with triple sealed units.
Learn more →Guide from £2,200Heritage Slim Double GlazingUnits as slim as 11mm for heritage sightlines.
Learn more →Guide from £1,900Hardwood Roof Lanterns & Orangery GlazingStructural hardwood lanterns and orangery roof glazing.
Learn more →Guide from £4,200Doors
Matched pairs of outward or inward opening hardwood doors.
Learn more →Guide from £2,600Timber Bi-Fold DoorsTop-hung folding sliding doors in engineered hardwood.
Learn more →Guide from £6,500Timber Sliding Patio DoorsLift-and-slide hardwood patio doors on hardwood tracks.
Learn more →Guide from £5,200Timber Front DoorsEngineered hardwood entrance doors with matching frames.
Learn more →Guide from £2,200Restoration
Full replacement of failed timber or uPVC windows.
Learn more →Guide from £1,700Hardwood Window RepairsSplice repairs, cill renewal and sash rebuilds.
Learn more →Guide from £450Draught Proofing & RestorationBrush-pile sealing and cord renewal for existing sashes.
Learn more →Guide from £380Local coverage
Towns we cover in Gloucestershire
Questions from Gloucestershire homeowners
Which hardwood should I choose?
It depends on the finish. For painted work, Idigbo and Accoya are excellent — stable, even-grained and superb paint substrates. For a stained or oiled finish where the grain is meant to show, European oak and Sapele are the usual choices. We will recommend a species at survey based on your finish and exposure.
What is Accoya and is it worth the premium?
Accoya is timber that has been acetylated — chemically modified so it no longer absorbs water. It barely moves, does not rot, and carries a 50-year above-ground warranty. It is the single best paint substrate available. For exposed elevations and coastal sites the premium usually pays for itself.
How do the surveys and quotations work?
The guide price tool gives you an indicative range in a couple of minutes. If that range works, we book a free survey — measurements, profiles, exposure, access — and issue a fixed written quotation with a drawing. Nothing is manufactured until you have approved that drawing.
What sort of guarantee do you offer?
Ten years on the joinery and the manufacture, and the sealed units carry their own manufacturer's warranty. Accoya frames carry the 50-year above-ground timber warranty from the material supplier. All of it is confirmed in writing with the quotation.
Will the timber warp or stick?
Not if it is specified correctly. Sticking comes from moisture ingress into unsealed end grain, or from solid stock used where laminated sections were needed. Kiln-dried timber, sealed end grain, factory finishing and engineered sections on longer spans between them eliminate it.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Gloucestershire to firm it up. No obligation either way.