Newbury, Berkshire
Double Glazed Timber Windows in Newbury
Argon-filled, low-e sealed units in hardwood frames — typically 1.2–1.4 W/m²K whole-window, comfortably Building Regs compliant.
Most double glazed timber windows enquiries we take from Newbury start with a photograph and a rough measurement. That is enough for an indicative figure — the survey firms it up.
What is included
- Kiln-dried to 12% moisture content before machining, so the sections stay true once they are installed.
- Stainless or solid brass ironmongery, because plated steel fails first and takes the finish with it.
- Glazing beaded internally, so the sealed units can be replaced without disturbing the external finish.
- Kiln-dried to 12% moisture content before machining, so the sections stay true once they are installed.
Newbury has a housing stock that punishes off-the-shelf joinery — openings settle, reveals go out of square, and cills rarely sit level. Bespoke double glazing solve that properly.
If you are working to a planning or listed building condition in Berkshire, send us the wording — we will specify to it and provide the drawings you need.
Double Glazing in Newbury
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Newbury
Like-for-like joinery for Grade I, II* and II properties.
Guide price →French Doors in NewburyMatched pairs of outward or inward opening hardwood doors.
Guide price →Repairs in NewburySplice repairs, cill renewal and sash rebuilds.
Guide price →Flush Casements in NewburySashes that sit flush within the frame for a clean, traditional face.
Guide price →Bay Windows in NewburySplayed, square and canted bays built as one structural unit.
Guide price →Triple Glazing in NewburyDeep-section hardwood frames with triple sealed units.
Guide price →Double Glazed Timber Windows nearby
Questions
Will the timber warp or stick?
Not if it is specified correctly. Sticking comes from moisture ingress into unsealed end grain, or from solid stock used where laminated sections were needed. Kiln-dried timber, sealed end grain, factory finishing and engineered sections on longer spans between them eliminate it.
Can you fit trickle vents?
Where Building Regulations require background ventilation, we design it into the head of the frame at manufacture. That looks far better and performs far better than a vent drilled through a finished frame on site.
Do you work on listed buildings?
Regularly. Listed building consent turns on detail — sightlines, glazing bar sections, opening method and glass type. We survey the existing joinery, record the profiles and produce drawings you can submit. We will not quote a detail we know will not pass.
How much maintenance do they need?
Far less than people expect. Wash the frames twice a year, inspect the finish annually, and expect to recoat exposed elevations every eight to ten years. Sheltered elevations often go considerably longer. Modern micro-porous coatings are a different product entirely from the gloss paints that gave timber its reputation.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Newbury to firm it up. No obligation either way.