Alresford, Hampshire
Double Glazed Timber Windows in Alresford
Argon-filled, low-e sealed units in hardwood frames — typically 1.2–1.4 W/m²K whole-window, comfortably Building Regs compliant.
Every double glazed timber windows we make in Alresford starts the same way: a surveyor measures the actual opening, records the existing profiles and checks how the reveal sits. Nothing is ordered from a catalogue.
What is included
- Factory-finished in controlled conditions — three coats minimum, fully cured before delivery.
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
- Micro-porous finishes that let the timber breathe rather than trapping moisture behind a hard film.
- Factory-finished in controlled conditions — three coats minimum, fully cured before delivery.
Choosing double glazing for a property in Alresford is mostly a question of substrate and detail. Get the timber and the sections right and the finish looks after itself for decades.
We install across Hampshire with our own fitting teams and make good internally as part of the price. No sub-contracted surprises.
Double Glazing in Alresford
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Alresford
Small-pane hardwood windows for cottages and barns.
Guide price →Bi-Fold Doors in AlresfordTop-hung folding sliding doors in engineered hardwood.
Guide price →Draught Proofing in AlresfordBrush-pile sealing and cord renewal for existing sashes.
Guide price →Oak Windows in AlresfordEuropean oak windows with exceptional grain and durability.
Guide price →Georgian Bars in AlresfordTrue astragal and putty-line glazing bars for period accuracy.
Guide price →Slim Glazing in AlresfordUnits as slim as 11mm for heritage sightlines.
Guide price →Double Glazed Timber Windows nearby
Questions
Do you take away the old windows?
Yes. Removal and responsible disposal are included, along with making good internally. We work one opening at a time so the property is never left open, and we clear the site each day.
How much disruption should I expect?
Less than most people fear. A straightforward replacement is one opening at a time, typically two to four windows a day. Scaffolding is only needed on higher elevations. We protect floors and furniture and leave the site clean each evening.
How long do hardwood windows actually last?
Properly specified and maintained hardwood joinery has a realistic service life of 60 years or more. The timber is rarely what fails — it is the finish and the seals, and both are renewable. That is the fundamental advantage over uPVC, where a failed unit or a distorted frame means the whole window goes.
Are timber windows warm enough for Building Regulations?
Yes, comfortably. Timber is a natural insulator with far lower conductivity than aluminium or steel. A standard hardwood double-glazed window achieves around 1.2–1.4 W/m²K whole-window, against a 1.4 requirement for replacements. Triple glazing in a deeper section will reach roughly 0.8.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Alresford to firm it up. No obligation either way.