Hampshire
Timber Flush Casement Windows in Hampshire
The flush casement is the classic English window — the sash closes flat into the frame, giving a clean shadow line and a very period-correct face.
Timber moves. The craft in timber flush casement windows is anticipating exactly how much, in Hampshire conditions, and detailing the joints and finish so that movement never becomes a problem.
Specified for Hampshire properties
- Trickle ventilation designed into the head where Building Regulations require it, not drilled in afterwards.
- Kiln-dried to 12% moisture content before machining, so the sections stay true once they are installed.
- Engineered laminated sections on anything over 1.2m, which resist bowing far better than solid stock.
- Stainless or solid brass ironmongery, because plated steel fails first and takes the finish with it.
- Weathered cills with a proper drip groove, so water leaves the timber instead of tracking back under it.
Our timber flush casement windows are made from kiln-dried hardwood, machined in the workshop and factory-finished before they ever reach a Hampshire site. Wet-brushing on site is where timber windows get a bad name.
Lead times for Winchester are typically six to ten weeks from approved drawings, depending on timber and finish. Repairs are usually much quicker.
Flush Casements in Hampshire
Free measured survey, fixed written price.
The process
How it runs in Hampshire
Get an indicative price
Use the guide price tool or send a photo and rough sizes. You get a realistic range in minutes.
Free measured survey
We measure the openings, record existing profiles and check exposure, access and cill condition.
Fixed quote and drawing
A written price and a section drawing. Nothing is manufactured until you approve it.
Manufacture and install
Made, finished and cured in the workshop, then fitted by our own team with making good included.
Timber Flush Casement Windows by town
Questions
Do you repair windows or only replace them?
We repair wherever repair is the right answer. Rot is normally localised in a cill or the bottom of a stile, and splicing in new hardwood is typically a third of the cost of replacement. We will tell you honestly at survey which way the economics fall.
Can you match existing windows?
Yes. That is most of what we do. We record the existing sections at survey, reproduce the mouldings and sightlines, and match the finish. On listed buildings we will produce like-for-like profile drawings for the consent application.
Are hardwood windows secure?
Yes. Multi-point locking, laminated glass options and key-locking handles are all available, and a solid hardwood frame is considerably harder to attack than a hollow plastic one. We can specify to PAS 24 where a planning condition or insurer requires it.
Do you take away the old windows?
Yes. Removal and responsible disposal are included, along with making good internally. We work one opening at a time so the property is never left open, and we clear the site each day.
How much disruption should I expect?
Less than most people fear. A straightforward replacement is one opening at a time, typically two to four windows a day. Scaffolding is only needed on higher elevations. We protect floors and furniture and leave the site clean each evening.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Hampshire to firm it up. No obligation either way.