Sandy, Bedfordshire
Hardwood Bay Windows in Sandy
Bay windows carry load, so they are made as a single engineered unit with proper corner posts and structural head — not bolted-together casements.
Timber moves. The craft in hardwood bay windows is anticipating exactly how much, in Sandy conditions, and detailing the joints and finish so that movement never becomes a problem.
What is included
- FSC-certified hardwood with documented chain of custody, available on request for planning submissions.
- Warm-edge spacer bars as standard, which cut the cold bridge at the glass edge and reduce condensation.
- Compression seals rather than brush pile where the design allows, for a measurably tighter close.
- FSC-certified hardwood with documented chain of custody, available on request for planning submissions.
We build bay windows for Sandy homes to the size of the hole in the wall, not to the nearest standard unit. That is the whole reason to specify timber in the first place.
Everything is made to order, so the quotation stage matters. We would rather spend an extra hour on the survey than get a section wrong.
Bay Windows in Sandy
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Sandy
Deep-section hardwood frames with triple sealed units.
Guide price →Sliding Doors in SandyLift-and-slide hardwood patio doors on hardwood tracks.
Guide price →Roof Lanterns in SandyStructural hardwood lanterns and orangery roof glazing.
Guide price →Accoya Windows in SandyModified timber with a 50-year above-ground warranty.
Guide price →Listed Buildings in SandyLike-for-like joinery for Grade I, II* and II properties.
Guide price →Tilt & Turn in SandyDual-action hardwood windows for ventilation and cleaning.
Guide price →Hardwood Bay Windows nearby
Questions
Are timber windows warm enough for Building Regulations?
Yes, comfortably. Timber is a natural insulator with far lower conductivity than aluminium or steel. A standard hardwood double-glazed window achieves around 1.2–1.4 W/m²K whole-window, against a 1.4 requirement for replacements. Triple glazing in a deeper section will reach roughly 0.8.
Can I have double glazing in a conservation area?
Usually, yes — using slim-profile sealed units as narrow as 11mm, which fit within traditional glazing bar sections without fattening them. Conservation officers vary, so we specify from the outset to whatever the local authority has stated and provide section drawings for the application.
Do you repair windows or only replace them?
We repair wherever repair is the right answer. Rot is normally localised in a cill or the bottom of a stile, and splicing in new hardwood is typically a third of the cost of replacement. We will tell you honestly at survey which way the economics fall.
Can you match existing windows?
Yes. That is most of what we do. We record the existing sections at survey, reproduce the mouldings and sightlines, and match the finish. On listed buildings we will produce like-for-like profile drawings for the consent application.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Sandy to firm it up. No obligation either way.