Bridge of Allan, Stirling
Hardwood Bay Windows in Bridge of Allan
Bay windows carry load, so they are made as a single engineered unit with proper corner posts and structural head — not bolted-together casements.
Our hardwood bay windows are made from kiln-dried hardwood, machined in the workshop and factory-finished before they ever reach a Bridge of Allan site. Wet-brushing on site is where timber windows get a bad name.
What is included
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
- Micro-porous finishes that let the timber breathe rather than trapping moisture behind a hard film.
- Factory-finished in controlled conditions — three coats minimum, fully cured before delivery.
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
Homeowners across Bridge of Allan come to us for bay windows after a uPVC replacement has aged badly. Timber is the material you specify when you intend to still be happy with it in twenty years.
Everything is made to order, so the quotation stage matters. We would rather spend an extra hour on the survey than get a section wrong.
Bay Windows in Bridge of Allan
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Bridge of Allan
Matched pairs of outward or inward opening hardwood doors.
Guide price →Repairs in Bridge of AllanSplice repairs, cill renewal and sash rebuilds.
Guide price →Flush Casements in Bridge of AllanSashes that sit flush within the frame for a clean, traditional face.
Guide price →Georgian Bars in Bridge of AllanTrue astragal and putty-line glazing bars for period accuracy.
Guide price →Triple Glazing in Bridge of AllanDeep-section hardwood frames with triple sealed units.
Guide price →Sliding Doors in Bridge of AllanLift-and-slide hardwood patio doors on hardwood tracks.
Guide price →Hardwood Bay Windows nearby
Questions
Do you take away the old windows?
Yes. Removal and responsible disposal are included, along with making good internally. We work one opening at a time so the property is never left open, and we clear the site each day.
How much disruption should I expect?
Less than most people fear. A straightforward replacement is one opening at a time, typically two to four windows a day. Scaffolding is only needed on higher elevations. We protect floors and furniture and leave the site clean each evening.
How long do hardwood windows actually last?
Properly specified and maintained hardwood joinery has a realistic service life of 60 years or more. The timber is rarely what fails — it is the finish and the seals, and both are renewable. That is the fundamental advantage over uPVC, where a failed unit or a distorted frame means the whole window goes.
Are timber windows warm enough for Building Regulations?
Yes, comfortably. Timber is a natural insulator with far lower conductivity than aluminium or steel. A standard hardwood double-glazed window achieves around 1.2–1.4 W/m²K whole-window, against a 1.4 requirement for replacements. Triple glazing in a deeper section will reach roughly 0.8.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Bridge of Allan to firm it up. No obligation either way.