Leatherhead, Surrey
Hardwood Bay Windows in Leatherhead
Bay windows carry load, so they are made as a single engineered unit with proper corner posts and structural head — not bolted-together casements.
We treat hardwood bay windows in Leatherhead as joinery rather than a product line. That means real sections, real ironmongery and a finish specified for the exposure the building actually gets.
What is included
- Micro-porous finishes that let the timber breathe rather than trapping moisture behind a hard film.
- Factory-finished in controlled conditions — three coats minimum, fully cured before delivery.
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
- Micro-porous finishes that let the timber breathe rather than trapping moisture behind a hard film.
Most bay windows enquiries we take from Leatherhead start with a photograph and a rough measurement. That is enough for an indicative figure — the survey firms it up.
We survey across Surrey at no charge and with no obligation. You get a fixed written price, a lead time and a drawing before anything is ordered.
Bay Windows in Leatherhead
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Leatherhead
True astragal and putty-line glazing bars for period accuracy.
Guide price →Triple Glazing in LeatherheadDeep-section hardwood frames with triple sealed units.
Guide price →Sliding Doors in LeatherheadLift-and-slide hardwood patio doors on hardwood tracks.
Guide price →Roof Lanterns in LeatherheadStructural hardwood lanterns and orangery roof glazing.
Guide price →Accoya Windows in LeatherheadModified timber with a 50-year above-ground warranty.
Guide price →Listed Buildings in LeatherheadLike-for-like joinery for Grade I, II* and II properties.
Guide price →Questions
Can I have double glazing in a conservation area?
Usually, yes — using slim-profile sealed units as narrow as 11mm, which fit within traditional glazing bar sections without fattening them. Conservation officers vary, so we specify from the outset to whatever the local authority has stated and provide section drawings for the application.
Do you repair windows or only replace them?
We repair wherever repair is the right answer. Rot is normally localised in a cill or the bottom of a stile, and splicing in new hardwood is typically a third of the cost of replacement. We will tell you honestly at survey which way the economics fall.
Can you match existing windows?
Yes. That is most of what we do. We record the existing sections at survey, reproduce the mouldings and sightlines, and match the finish. On listed buildings we will produce like-for-like profile drawings for the consent application.
Are hardwood windows secure?
Yes. Multi-point locking, laminated glass options and key-locking handles are all available, and a solid hardwood frame is considerably harder to attack than a hollow plastic one. We can specify to PAS 24 where a planning condition or insurer requires it.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Leatherhead to firm it up. No obligation either way.