Lancashire
Hardwood Tilt & Turn Windows in Lancashire
Tilt for secure trickle ventilation, turn fully inward for cleaning and escape — the European system in a solid hardwood frame.
We build hardwood tilt & turn windows for Lancashire homes to the size of the hole in the wall, not to the nearest standard unit. That is the whole reason to specify timber in the first place.
Specified for Lancashire properties
- Factory-finished in controlled conditions — three coats minimum, fully cured before delivery.
- Warm-edge spacer bars as standard, which cut the cold bridge at the glass edge and reduce condensation.
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
- Compression seals rather than brush pile where the design allows, for a measurably tighter close.
- Micro-porous finishes that let the timber breathe rather than trapping moisture behind a hard film.
Homeowners across Lancashire come to us for hardwood tilt & turn windows after a uPVC replacement has aged badly. Timber is the material you specify when you intend to still be happy with it in twenty years.
We install across Lancashire with our own fitting teams and make good internally as part of the price. No sub-contracted surprises.
Tilt & Turn in Lancashire
Free measured survey, fixed written price.
The process
How it runs in Lancashire
Get an indicative price
Use the guide price tool or send a photo and rough sizes. You get a realistic range in minutes.
Free measured survey
We measure the openings, record existing profiles and check exposure, access and cill condition.
Fixed quote and drawing
A written price and a section drawing. Nothing is manufactured until you approve it.
Manufacture and install
Made, finished and cured in the workshop, then fitted by our own team with making good included.
Questions
Can you fit trickle vents?
Where Building Regulations require background ventilation, we design it into the head of the frame at manufacture. That looks far better and performs far better than a vent drilled through a finished frame on site.
Do you work on listed buildings?
Regularly. Listed building consent turns on detail — sightlines, glazing bar sections, opening method and glass type. We survey the existing joinery, record the profiles and produce drawings you can submit. We will not quote a detail we know will not pass.
How much maintenance do they need?
Far less than people expect. Wash the frames twice a year, inspect the finish annually, and expect to recoat exposed elevations every eight to ten years. Sheltered elevations often go considerably longer. Modern micro-porous coatings are a different product entirely from the gloss paints that gave timber its reputation.
Which hardwood should I choose?
It depends on the finish. For painted work, Idigbo and Accoya are excellent — stable, even-grained and superb paint substrates. For a stained or oiled finish where the grain is meant to show, European oak and Sapele are the usual choices. We will recommend a species at survey based on your finish and exposure.
What is Accoya and is it worth the premium?
Accoya is timber that has been acetylated — chemically modified so it no longer absorbs water. It barely moves, does not rot, and carries a 50-year above-ground warranty. It is the single best paint substrate available. For exposed elevations and coastal sites the premium usually pays for itself.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Lancashire to firm it up. No obligation either way.