Carnoustie, Angus
Hardwood Roof Lanterns & Orangery Glazing in Carnoustie
Hardwood roof lanterns built as a structural frame with concealed aluminium capping to take the weather off the timber.
Carnoustie has a housing stock that punishes off-the-shelf joinery — openings settle, reveals go out of square, and cills rarely sit level. Bespoke hardwood roof lanterns & orangery glazing solve that properly.
What is included
- Warm-edge spacer bars as standard, which cut the cold bridge at the glass edge and reduce condensation.
- Compression seals rather than brush pile where the design allows, for a measurably tighter close.
- FSC-certified hardwood with documented chain of custody, available on request for planning submissions.
- Warm-edge spacer bars as standard, which cut the cold bridge at the glass edge and reduce condensation.
If you have been quoted for roof lanterns in Carnoustie and the price looked suspiciously round, it was almost certainly a standard size with a filler piece. We do not work that way.
We survey across Angus at no charge and with no obligation. You get a fixed written price, a lead time and a drawing before anything is ordered.
Roof Lanterns in Carnoustie
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Carnoustie
Lift-and-slide hardwood patio doors on hardwood tracks.
Guide price →Sash Windows in CarnoustieTraditional box and spring sliding sash windows in solid hardwood.
Guide price →Sapele Windows in CarnoustieA dense, stable hardwood with a warm reddish tone.
Guide price →Listed Buildings in CarnoustieLike-for-like joinery for Grade I, II* and II properties.
Guide price →Tilt & Turn in CarnoustieDual-action hardwood windows for ventilation and cleaning.
Guide price →Replacement in CarnoustieFull replacement of failed timber or uPVC windows.
Guide price →Questions
How much disruption should I expect?
Less than most people fear. A straightforward replacement is one opening at a time, typically two to four windows a day. Scaffolding is only needed on higher elevations. We protect floors and furniture and leave the site clean each evening.
How long do hardwood windows actually last?
Properly specified and maintained hardwood joinery has a realistic service life of 60 years or more. The timber is rarely what fails — it is the finish and the seals, and both are renewable. That is the fundamental advantage over uPVC, where a failed unit or a distorted frame means the whole window goes.
Are timber windows warm enough for Building Regulations?
Yes, comfortably. Timber is a natural insulator with far lower conductivity than aluminium or steel. A standard hardwood double-glazed window achieves around 1.2–1.4 W/m²K whole-window, against a 1.4 requirement for replacements. Triple glazing in a deeper section will reach roughly 0.8.
Can I have double glazing in a conservation area?
Usually, yes — using slim-profile sealed units as narrow as 11mm, which fit within traditional glazing bar sections without fattening them. Conservation officers vary, so we specify from the outset to whatever the local authority has stated and provide section drawings for the application.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Carnoustie to firm it up. No obligation either way.