Betws-y-Coed, Conwy
Timber Sliding Patio Doors in Betws-y-Coed
Lift-and-slide gear takes the weight off the seals when the door moves, then drops it back down to compress them shut.
Betws-y-Coed has a housing stock that punishes off-the-shelf joinery — openings settle, reveals go out of square, and cills rarely sit level. Bespoke timber sliding patio doors solve that properly.
What is included
- Warm-edge spacer bars as standard, which cut the cold bridge at the glass edge and reduce condensation.
- Compression seals rather than brush pile where the design allows, for a measurably tighter close.
- FSC-certified hardwood with documented chain of custody, available on request for planning submissions.
- Warm-edge spacer bars as standard, which cut the cold bridge at the glass edge and reduce condensation.
If you have been quoted for sliding doors in Betws-y-Coed and the price looked suspiciously round, it was almost certainly a standard size with a filler piece. We do not work that way.
We survey across Conwy at no charge and with no obligation. You get a fixed written price, a lead time and a drawing before anything is ordered.
Sliding Doors in Betws-y-Coed
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Betws-y-Coed
Deep-section hardwood frames with triple sealed units.
Guide price →Front Doors in Betws-y-CoedEngineered hardwood entrance doors with matching frames.
Guide price →Sash Windows in Betws-y-CoedTraditional box and spring sliding sash windows in solid hardwood.
Guide price →Sapele Windows in Betws-y-CoedA dense, stable hardwood with a warm reddish tone.
Guide price →Listed Buildings in Betws-y-CoedLike-for-like joinery for Grade I, II* and II properties.
Guide price →Tilt & Turn in Betws-y-CoedDual-action hardwood windows for ventilation and cleaning.
Guide price →Timber Sliding Patio Doors nearby
Questions
Are timber windows warm enough for Building Regulations?
Yes, comfortably. Timber is a natural insulator with far lower conductivity than aluminium or steel. A standard hardwood double-glazed window achieves around 1.2–1.4 W/m²K whole-window, against a 1.4 requirement for replacements. Triple glazing in a deeper section will reach roughly 0.8.
Can I have double glazing in a conservation area?
Usually, yes — using slim-profile sealed units as narrow as 11mm, which fit within traditional glazing bar sections without fattening them. Conservation officers vary, so we specify from the outset to whatever the local authority has stated and provide section drawings for the application.
Do you repair windows or only replace them?
We repair wherever repair is the right answer. Rot is normally localised in a cill or the bottom of a stile, and splicing in new hardwood is typically a third of the cost of replacement. We will tell you honestly at survey which way the economics fall.
Can you match existing windows?
Yes. That is most of what we do. We record the existing sections at survey, reproduce the mouldings and sightlines, and match the finish. On listed buildings we will produce like-for-like profile drawings for the consent application.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Betws-y-Coed to firm it up. No obligation either way.