Ross-on-Wye, Herefordshire
Timber Sliding Patio Doors in Ross-on-Wye
Lift-and-slide gear takes the weight off the seals when the door moves, then drops it back down to compress them shut.
Our timber sliding patio doors are made from kiln-dried hardwood, machined in the workshop and factory-finished before they ever reach a Ross-on-Wye site. Wet-brushing on site is where timber windows get a bad name.
What is included
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
- Micro-porous finishes that let the timber breathe rather than trapping moisture behind a hard film.
- Factory-finished in controlled conditions — three coats minimum, fully cured before delivery.
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
Homeowners across Ross-on-Wye come to us for sliding doors after a uPVC replacement has aged badly. Timber is the material you specify when you intend to still be happy with it in twenty years.
Everything is made to order, so the quotation stage matters. We would rather spend an extra hour on the survey than get a section wrong.
Sliding Doors in Ross-on-Wye
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Ross-on-Wye
Engineered hardwood entrance doors with matching frames.
Guide price →Sash Windows in Ross-on-WyeTraditional box and spring sliding sash windows in solid hardwood.
Guide price →Sapele Windows in Ross-on-WyeA dense, stable hardwood with a warm reddish tone.
Guide price →Listed Buildings in Ross-on-WyeLike-for-like joinery for Grade I, II* and II properties.
Guide price →Tilt & Turn in Ross-on-WyeDual-action hardwood windows for ventilation and cleaning.
Guide price →Repairs in Ross-on-WyeSplice repairs, cill renewal and sash rebuilds.
Guide price →Timber Sliding Patio Doors nearby
Questions
Can I have double glazing in a conservation area?
Usually, yes — using slim-profile sealed units as narrow as 11mm, which fit within traditional glazing bar sections without fattening them. Conservation officers vary, so we specify from the outset to whatever the local authority has stated and provide section drawings for the application.
Do you repair windows or only replace them?
We repair wherever repair is the right answer. Rot is normally localised in a cill or the bottom of a stile, and splicing in new hardwood is typically a third of the cost of replacement. We will tell you honestly at survey which way the economics fall.
Can you match existing windows?
Yes. That is most of what we do. We record the existing sections at survey, reproduce the mouldings and sightlines, and match the finish. On listed buildings we will produce like-for-like profile drawings for the consent application.
Are hardwood windows secure?
Yes. Multi-point locking, laminated glass options and key-locking handles are all available, and a solid hardwood frame is considerably harder to attack than a hollow plastic one. We can specify to PAS 24 where a planning condition or insurer requires it.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Ross-on-Wye to firm it up. No obligation either way.