Sheffield, South Yorkshire
Timber Sliding Patio Doors in Sheffield
Lift-and-slide gear takes the weight off the seals when the door moves, then drops it back down to compress them shut.
We treat timber sliding patio doors in Sheffield as joinery rather than a product line. That means real sections, real ironmongery and a finish specified for the exposure the building actually gets.
What is included
- Micro-porous finishes that let the timber breathe rather than trapping moisture behind a hard film.
- Factory-finished in controlled conditions — three coats minimum, fully cured before delivery.
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
- Micro-porous finishes that let the timber breathe rather than trapping moisture behind a hard film.
Most sliding doors enquiries we take from Sheffield start with a photograph and a rough measurement. That is enough for an indicative figure — the survey firms it up.
We survey across South Yorkshire at no charge and with no obligation. You get a fixed written price, a lead time and a drawing before anything is ordered.
Sliding Doors in Sheffield
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Sheffield
Deep-section hardwood frames with triple sealed units.
Guide price →Front Doors in SheffieldEngineered hardwood entrance doors with matching frames.
Guide price →Sash Windows in SheffieldTraditional box and spring sliding sash windows in solid hardwood.
Guide price →Sapele Windows in SheffieldA dense, stable hardwood with a warm reddish tone.
Guide price →Listed Buildings in SheffieldLike-for-like joinery for Grade I, II* and II properties.
Guide price →Tilt & Turn in SheffieldDual-action hardwood windows for ventilation and cleaning.
Guide price →Timber Sliding Patio Doors nearby
Questions
Can I have double glazing in a conservation area?
Usually, yes — using slim-profile sealed units as narrow as 11mm, which fit within traditional glazing bar sections without fattening them. Conservation officers vary, so we specify from the outset to whatever the local authority has stated and provide section drawings for the application.
Do you repair windows or only replace them?
We repair wherever repair is the right answer. Rot is normally localised in a cill or the bottom of a stile, and splicing in new hardwood is typically a third of the cost of replacement. We will tell you honestly at survey which way the economics fall.
Can you match existing windows?
Yes. That is most of what we do. We record the existing sections at survey, reproduce the mouldings and sightlines, and match the finish. On listed buildings we will produce like-for-like profile drawings for the consent application.
Are hardwood windows secure?
Yes. Multi-point locking, laminated glass options and key-locking handles are all available, and a solid hardwood frame is considerably harder to attack than a hollow plastic one. We can specify to PAS 24 where a planning condition or insurer requires it.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Sheffield to firm it up. No obligation either way.