Skip to content
Hardwood Windows — Crafted in wood. Built to last.
Sash WindowsCasement WindowsFlush CasementsOak WindowsAccoya WindowsSapele WindowsIdigbo WindowsBay WindowsGeorgian BarsConservation WindowsListed BuildingsCottage WindowsDouble GlazingTriple GlazingSlim GlazingTilt & TurnFrench DoorsBi-Fold DoorsSliding DoorsFront DoorsReplacementRepairsDraught ProofingRoof Lanterns

England

Hardwood windows in Hampshire

Bespoke timber windows and doors, surveyed, made and installed across Hampshire — Winchester, Southampton, Portsmouth, Basingstoke, Andover and everywhere between.

Timber moves. The craft in hardwood windows is anticipating exactly how much, in Hampshire conditions, and detailing the joints and finish so that movement never becomes a problem.

Choosing timber joinery for a property in Hampshire is mostly a question of substrate and detail. Get the timber and the sections right and the finish looks after itself for decades.

What we bring to a Hampshire project

Standard on every order
  • FSC-certified hardwood with documented chain of custody, available on request for planning submissions.
  • Factory-finished in controlled conditions — three coats minimum, fully cured before delivery.
  • Warm-edge spacer bars as standard, which cut the cold bridge at the glass edge and reduce condensation.
  • End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
  • Compression seals rather than brush pile where the design allows, for a measurably tighter close.

Guide prices in Hampshire

Prices below are supplied-and-fitted including VAT, for a typical domestic unit in Idigbo with double glazing and a factory-painted finish. Oak, Accoya, triple glazing and larger openings move the figure up; ordering several units at once brings it down.

ProductGuide range, fitted
Hardwood Sash Windows£1,900 – £2,600
Timber Casement Windows£1,400 – £1,900
Timber Flush Casement Windows£1,500 – £2,050
Oak Windows£2,300 – £3,200
Accoya Windows£2,100 – £2,900
Sapele Windows£1,700 – £2,300
Idigbo Windows£1,500 – £2,050
Hardwood Bay Windows£3,800 – £5,500
Georgian Bar Windows£1,800 – £2,500
Conservation Area Windows£2,000 – £2,800

We install across Hampshire with our own fitting teams and make good internally as part of the price. No sub-contracted surprises.

Free survey in Hampshire

Measured, priced and drawn before anything is made.

Thank you — your enquiry is in. We aim to reply within one working hour.

No obligation. No pushy sales visit. A written price within 48 hours of survey.

10-year joinery guaranteeWritten cover on manufacture and installation.
Free measured surveyNo charge, no obligation, fixed written price after.
FSC-certified hardwoodDocumented chain of custody on request.
Nationwide installationOur own fitting teams, England, Wales and Scotland.
Fixed-price quotationsThe figure on the quote is the figure you pay.

Every product, available across Hampshire

Windows

Timber

Heritage

Glazing

Doors

Restoration

Questions from Hampshire homeowners

How much disruption should I expect?

Less than most people fear. A straightforward replacement is one opening at a time, typically two to four windows a day. Scaffolding is only needed on higher elevations. We protect floors and furniture and leave the site clean each evening.

How long do hardwood windows actually last?

Properly specified and maintained hardwood joinery has a realistic service life of 60 years or more. The timber is rarely what fails — it is the finish and the seals, and both are renewable. That is the fundamental advantage over uPVC, where a failed unit or a distorted frame means the whole window goes.

Are timber windows warm enough for Building Regulations?

Yes, comfortably. Timber is a natural insulator with far lower conductivity than aluminium or steel. A standard hardwood double-glazed window achieves around 1.2–1.4 W/m²K whole-window, against a 1.4 requirement for replacements. Triple glazing in a deeper section will reach roughly 0.8.

Can I have double glazing in a conservation area?

Usually, yes — using slim-profile sealed units as narrow as 11mm, which fit within traditional glazing bar sections without fattening them. Conservation officers vary, so we specify from the outset to whatever the local authority has stated and provide section drawings for the application.

Do you repair windows or only replace them?

We repair wherever repair is the right answer. Rot is normally localised in a cill or the bottom of a stile, and splicing in new hardwood is typically a third of the cost of replacement. We will tell you honestly at survey which way the economics fall.

Get an indicative price in two minutes

Use the guide price tool for a realistic range, then book a free measured survey in Hampshire to firm it up. No obligation either way.

Call nowGet a quote