Bridge of Allan, Stirling
Draught Proofing & Restoration in Bridge of Allan
Routed-in brush pile, new cords and rebalanced weights turn a rattling original sash into something that seals and glides.
Our draught proofing & restoration are made from kiln-dried hardwood, machined in the workshop and factory-finished before they ever reach a Bridge of Allan site. Wet-brushing on site is where timber windows get a bad name.
What is included
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
- Micro-porous finishes that let the timber breathe rather than trapping moisture behind a hard film.
- Factory-finished in controlled conditions — three coats minimum, fully cured before delivery.
- End-grain sealed at every cut before assembly — the single detail that decides whether joinery rots.
Homeowners across Bridge of Allan come to us for draught proofing after a uPVC replacement has aged badly. Timber is the material you specify when you intend to still be happy with it in twenty years.
Everything is made to order, so the quotation stage matters. We would rather spend an extra hour on the survey than get a section wrong.
Draught Proofing in Bridge of Allan
Free measured survey, fixed written price.
Indicative price now
Four questions, realistic range, no contact details needed to see it.
Open the guide price toolOther products for Bridge of Allan
A dense, stable hardwood with a warm reddish tone.
Guide price →Listed Buildings in Bridge of AllanLike-for-like joinery for Grade I, II* and II properties.
Guide price →Tilt & Turn in Bridge of AllanDual-action hardwood windows for ventilation and cleaning.
Guide price →Replacement in Bridge of AllanFull replacement of failed timber or uPVC windows.
Guide price →Flush Casements in Bridge of AllanSashes that sit flush within the frame for a clean, traditional face.
Guide price →Bay Windows in Bridge of AllanSplayed, square and canted bays built as one structural unit.
Guide price →Draught Proofing & Restoration nearby
Questions
Can I have double glazing in a conservation area?
Usually, yes — using slim-profile sealed units as narrow as 11mm, which fit within traditional glazing bar sections without fattening them. Conservation officers vary, so we specify from the outset to whatever the local authority has stated and provide section drawings for the application.
Do you repair windows or only replace them?
We repair wherever repair is the right answer. Rot is normally localised in a cill or the bottom of a stile, and splicing in new hardwood is typically a third of the cost of replacement. We will tell you honestly at survey which way the economics fall.
Can you match existing windows?
Yes. That is most of what we do. We record the existing sections at survey, reproduce the mouldings and sightlines, and match the finish. On listed buildings we will produce like-for-like profile drawings for the consent application.
Are hardwood windows secure?
Yes. Multi-point locking, laminated glass options and key-locking handles are all available, and a solid hardwood frame is considerably harder to attack than a hollow plastic one. We can specify to PAS 24 where a planning condition or insurer requires it.
Get an indicative price in two minutes
Use the guide price tool for a realistic range, then book a free measured survey in Bridge of Allan to firm it up. No obligation either way.
